Typical Scan Tool Data
WARNING: This page is about a different variant/trim than selected.
MAP Sensor
| Circuit | Short to Ground | Open | Short to Voltage |
|---|---|---|---|
| Operating Conditions:
The ignition is ON, or the engine running. Normal MAP Parameter: 20-48 kPa |
|||
| 5-Volt Reference | 10 kPa | 10 kPa | 104 kPa |
| MAP Sensor Signal | 10 kPa | 10 kPa | 104 kPa2 |
| Low Reference | - | 90-104 kPa1 , 2 | - |
| 1
Varies, depending on ECM software version 2 Internal ECM or sensor damage may occur if the circuit is shorted to B+ |
|||