LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2010 >> STS 3.6 V, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Engine Mechanical - 4.6L (LH2) - Repair Instructions - Off Vehicle - 3 Of 3) >> Oil Pump Outlet Tube Installation

Oil Pump Outlet Tube Installation

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Oil Outlet Tube O-Ring
    GM928363Courtesy of GENERAL MOTORS CORP.
  1. Install a NEW O-ring on the oil outlet tube.
  2. Apply lubricant to the O-ring.
    3. Fig 2: Oil Outlet Tube & Bolts
    GM928361Courtesy of GENERAL MOTORS CORP.
  3. Install the oil outlet tube.
    4. CAUTION: Refer to Fastener Caution .
  4. Install the oil outlet tube bolts (1-5) and tighten to 10 N.m (89 lb in).
scientia non olet · About LEMON Manuals