LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2010 >> STS 3.6 V, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 4.6L (LH2) - Repair Instructions - On Vehicle - 1 Of 2) >> Oil Pump Suction Pipe and Screen Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the engine oil pan. Refer to Oil Pan Replacement .
    2. Fig 1: Oil Pump Pipe & Screen Assembly
    GM1346218Courtesy of GENERAL MOTORS CORP.
  2. Remove the oil pump pipe support bracket nut.
  3. Remove the oil pump pipe bolt.
  4. Remove the oil pump pipe and screen assembly.
    5. Fig 2: Oil Pump Pipe Gasket
    GM928635Courtesy of GENERAL MOTORS CORP.
  5. Remove and discard the oil pump pipe gasket.
scientia non olet · About LEMON Manuals