LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2010 >> STS 3.6 V, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 4.6L (LH2) - Repair Instructions - On Vehicle - 1 Of 2) >> Oil Level Indicator Tube Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Oil Level Indicator Tube
    GM928132Courtesy of GENERAL MOTORS CORP.
  1. Remove the front compartment sight shield as necessary. Refer to Front Compartment Sight Shields Replacement .
  2. Remove the oil level indicator.
  3. Loosen the oil level indicator tube bolt.
  4. Pull the oil level indicator tube from the crankcase.
scientia non olet · About LEMON Manuals