LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2010 >> STS 3.6 V, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 4.6L (LH2) - Repair Instructions - On Vehicle - 1 Of 2) >> Oil Level Indicator Tube Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Oil Level Indicator Tube
    GM928132Courtesy of GENERAL MOTORS CORP.
  1. Replace the oil level indicator tube O-ring.
  2. Install the oil level indicator tube.
    3. CAUTION: Refer to Fastener Caution .
  3. Install the oil level indicator tube bolt and tighten to 10 N.m (89 lb in).
  4. Install the oil level indicator.
  5. Install the front compartment sight shield as necessary. Refer to Front Compartment Sight Shields Replacement .
scientia non olet · About LEMON Manuals