LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2010 >> STS 3.6 V, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 4.6L (LH2) - Repair Instructions - On Vehicle - 1 Of 2) >> Engine Mount Replacement - Right Side (with AWD) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the right engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side (RWD)  or Engine Mount Bracket Replacement - Right Side (with AWD) .
  3. Fig 1: Engine Mount Retaining Nuts
    GM1067552Courtesy of GENERAL MOTORS CORP.
  4. Remove the engine mount retaining nut.
  5. Remove the engine mount from the vehicle.