Engine Coolant Fan Shroud Replacement (LH2 without V03, LLT)

Fig 1: Engine Coolant Fan Shroud (LH2 Without V03, LLT)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures WARNING: An electric fan under the hood can start up even when the engine is not running and can injure you. Keep hands, clothing and tools away from any underhood electric fan. Remove the air cleaner. Refer to Air Cleaner Assembly Replacement Remove the front compartment sight shield. Refer to Front Compartment Sight Shields Replacement Disconnect the cooling fan electrical connectors Remove the auxiliary water pump and any hoses. Remove any hoses or pipes. Disconnect the condenser tube from the cooling fan shroud retainer clip. Disengage the surge tank inlet hose from the retaining features on the cooling fan shroud and reposition aside.
1	Engine Cooling Fan Shroud Fasteners (Qty 4) CAUTION: Refer to Fastener Caution . Tighten: 5.4 N.m (48 lb in)
2	Engine Cooling Fan Shroud

Callout

Component Name

Preliminary Procedures

WARNING: An electric fan under the hood can start up even when the engine is not running and can injure you. Keep hands, clothing and tools away from any underhood electric fan.

Remove the air cleaner. Refer to Air Cleaner Assembly Replacement
Remove the front compartment sight shield. Refer to Front Compartment Sight Shields Replacement
Disconnect the cooling fan electrical connectors
Remove the auxiliary water pump and any hoses.
Remove any hoses or pipes.
Disconnect the condenser tube from the cooling fan shroud retainer clip.
Disengage the surge tank inlet hose from the retaining features on the cooling fan shroud and reposition aside.

Engine Cooling Fan Shroud Fasteners (Qty 4)

CAUTION: Refer to Fastener Caution .

Tighten: 5.4 N.m (48 lb in)

Engine Cooling Fan Shroud