LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2010 >> STS 3.6 V, AWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Rear Compartment Lid Overslam Bumper Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Compartment Lid Outer Bumper
    GM1315885Courtesy of GENERAL MOTORS CORP.
  1. Install the outer bumper to the compartment lid by twisting the bumper clockwise.
  2. Adjust the hinge to raise lid corner.
    3. Fig 2: Hinge Bumpers
    GM1701380Courtesy of GENERAL MOTORS CORP.
  3. Install the bumpers (1, 2) to the hinge.
  4. Close the rear compartment.
scientia non olet · About LEMON Manuals