LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2010 >> STS 3.6 V, AWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Adjustment

Hood Adjustment

    Fig 1: Hood Hinges & Fasteners
    GM743350Courtesy of GENERAL MOTORS CORP.
  1. Loosen the fasteners (2) that secure the hood to the hood hinges (1).
  2. Adjust the hood in order to obtain an even gap on both sides between the hood and the fenders and so that the hood is flush with both fenders on the front edge.
    3. CAUTION: Refer to Fastener Caution .
  3. Tighten the fasteners (2) in order to secure the hood to the hood hinges (1) and tighten to 9 N.m (80 lb in).
scientia non olet · About LEMON Manuals