Wheel Seal: Remove & Replace
WARNING: This page is about the Escalade Hybrid, 4WD, which is a different variant/trim than selected.
Includes: Repack and adjust Bearings (where applicable).| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Front | Refer to Wheel Hub - R&R. | B | ||
| Rear,Both | 2.7 | 2.0 | B | |
| Rear,One Side | 2.0 | 1.5 | B | |
| Combination Procedure: DISC ROTOR: Correct: | ||||
| Lateral Runout,Each | Correct Rotor lateral runout by indexing or correction plate. | 0.2 | B | |
| Combination Procedure: HUB & ROTOR DISC: Clean & Inspect: | ||||
| Corrosion,Each | Clean any rust or corrosion from mating surface of Hub/Axle Flange and Brake Rotor. | 0.2 | B | |
| Combination Procedure: OIL SEAL WEAR SLEEVE: Replace: | ||||
| Each | 0.2 | B | ||