Exhaust Hanger Mounting Bracket Replacement

Exhaust Hanger Mounting Bracket Replacement

Removal Procedure




1. Remove the intermediate exhaust pipe. Refer to Intermediate Pipe Replacement (Service and Repair).
2. Remove the upper exhaust pipe hanger bolts (1).
3. Remove the exhaust pipe hanger.

Installation Procedure




1. Install the exhaust pipe hanger.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the upper exhaust pipe hanger bolts (1) and tighten to 50 Nm (37 lb ft).
3. Install the intermediate exhaust pipe. Refer to Intermediate Pipe Replacement (Service and Repair).