Foot Rest Replacement

Foot Rest Replacement

Removal Procedure




1. Remove the nut attaching the foot rest to the side rail.
2. Remove the nut attaching the foot rest to the dash panel stud.
3. Remove the foot rest.

Installation Procedure




1. Place the spacer on the dash panel stud.
2. Position the foot rest over the spacer.

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the nut to the stud and tighten to 10 Nm (89 lb in).
4. Install the nut to the side rail stud and tighten to 10 Nm (89 lb in).