Removal Procedure
- Remove the radiator support. Refer to Radiator Support Replacement .
- Disengage the plastic cap from the TOC fitting.
Pull the plastic cap back along the pipe.
- Disconnect the TOC line from the TOC fitting. Refer to Transmission Fluid Cooler Lower Pipe Assembly Replacement - Transmission to Auxiliary Cooler and Transmission Fluid Cooler Lower Pipe Assembly Replacement - Auxiliary Cooler to Radiator .
- Remove the TOC fitting from the radiator.
NOTE:
The transmission oil cooler in held into position inside the radiator by the TOC fittings.
Service one TOC fitting at a time. Removal of both TOC fittings will cause the cooler tank to fall out of position and require radiator removal to install the TOC fittings.
Service one TOC fitting at a time. Removal of both TOC fittings will cause the cooler tank to fall out of position and require radiator removal to install the TOC fittings.