LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> XLR Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays & Gauges >> Repair Instructions >> Instrument Cluster Replacement >> Installation Procedure

Installation Procedure

  1. Connect the IPC electrical connector.
  2. Position the IPC to the steering column bracket.
    3. Fig 1: View Of IPC & Screws
    GM1224708Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  3. Install the screws which retain the IPC to the steering column bracket and tighten to 3 N.m (27 lb in).
  4. Connect the HUD electrical connector to the IPC.
  5. Install the I/P trim pad. Refer to Instrument Panel Trim Pad Replacement .
  6. Connect the negative battery cable. Tighten the bolt to 15 N.m (11 lb ft).
  7. Refer to Control Module References for programming and setup information.
scientia non olet · About LEMON Manuals