LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> XLR Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays & Gauges >> Repair Instructions >> Head Up Display Switch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of HUD Switch Assembly
    GM1224608Courtesy of GENERAL MOTORS CORP.
  1. Install the HUD switch to the I/P cluster bezel.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the HUD switch retaining screws and tighten to 1.5 N.m (13 lb in).
  3. Connect the I/P dimmer/HUD switch electrical connector.
  4. Install the HUD switch assembly to the I/P and tighten to 1.5 N.m (13 lb in).
  5. Install the knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement .
scientia non olet · About LEMON Manuals