LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> XLR Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays & Gauges >> Repair Instructions >> Driver Information Display Switch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of DIC Switch Pod
    GM1224702Courtesy of GENERAL MOTORS CORP.
  1. Install the DIC switch to the IP cluster bezel.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the DIC switch retaining screws and tighten to 1.5 N.m (13 lb in).
    3. Fig 2: View Of DIC Switch & Electrical Connector
    GM1224598Courtesy of GENERAL MOTORS CORP.
  3. Connect the DIC switch electrical connector.
  4. Install the retaining screw at the bottom of the DIC switch pad and tighten to 1.5 N.m (13 lb in).
  5. Install the knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement .
scientia non olet · About LEMON Manuals