LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> XLR Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays & Gauges >> Repair Instructions >> Ambient Air Temperature Gage Sensor Replacement >> Installation Procedure

Installation Procedure

  1. Connect the inside air temperature sensor electrical connector.
    2. Fig 1: View Of Inside Air Temperature Sensor Electrical Connector
    GM922611Courtesy of GENERAL MOTORS CORP.
    NOTE: Ensure that the inside temperature sensor is fully seated into the DIC bezel.
  2. Install the inside air temperature sensor.
  3. Connect driver information center to the I/P.
    4. CAUTION: Refer to Fastener Caution .
  4. Install the driver information center retaining screw and tighten to 1.9 N.m (17 lb in).
  5. Install the knee bolster. Refer to Driver Knee Bolster Panel Replacement .
scientia non olet · About LEMON Manuals