LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> STS V >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 6L50/6L80 - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - On Vehicle >> Transmission Mount Replacement (Rear Wheel Drive) >> Installation Procedure

Installation Procedure

  1. Install the transmission mount support assembly to the vehicle.
    2. Fig 1: View Of Transmission Mounting Bolts
    GM1649726Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  2. Install the transmission mount support to transmission mounting bolts and tighten to 60 N.m (44 lb ft).
  3. Install the transmission mount support to body mounting bolts and tighten to 60 N.m (44 lb ft).
    4. Fig 2: View Of Transmission Mount Assembly Components
    GM1850370Courtesy of GENERAL MOTORS CORP.
  4. Install the transmission vent hose to the retainers (6) on the mount assembly.
  5. Remove the transmission jack.
  6. Install the exhaust system.
  7. Lower the vehicle.
scientia non olet · About LEMON Manuals