LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> STS V >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 6L50/6L80 - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - On Vehicle >> Transmission Fluid Cooler Pipe Replacement - Front >> Installation Procedure

Installation Procedure

  1. Install the front TOC lines.
  2. Connect the front TOC line to the rear TOC line.
  3. Connect the front TOC line to the radiator.
  4. Fig 1: Locating Cooler Retainer Clips
    GM1704897Courtesy of GENERAL MOTORS CORP.
  5. Connect the TOC lines to the transmission oil cooler.
  6. Reposition the radiator.
  7. Fig 2: View Of Radiator Support Brackets
    GM1334986Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  8. Install the bolts that secure the radiator support brackets and tighten to 9 N.m (80 lb in).
  9. Install the bolts that secure the TOC line to the cooling fan shroud and tighten to 6.5 N.m (58 lb in).
  10. Reposition and reinstall the condenser. Refer to Air Conditioning Condenser Replacement (Heavy Duty Cooling) or Air Conditioning Condenser Replacement (Standard Cooling) .