Transmission Control Lever Knob Replacement

Fig 1: Identifying Shift Knob Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Shift Control Knob Bezel Tip:  Removal: Carefully insert a small flat-bladed tool between the bezel (1) and the shift knob (3). Apply careful downward pressure to the bezel to separate the bezel from the shift knob. Installation: Lift the bezel (1) up to the shift knob (3) until a click sound is heard indicating the bezel is secured to the shift knob.
2	Shift Control Knob Screw CAUTION: Refer to Fastener Caution . Tip:  Loosen the shift control knob screw approximately 3-4 turns. It is not necessary to fully remove the screw from the shift control knob and tighten to 2 (18 lb in).
3	Shift Control Knob