LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> STS AWD V8-4.6L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> Repair Instructions >> 136. Drive Belt Idler Pulley Installation

136. Drive Belt Idler Pulley Installation




Drive Belt Idler Pulley Installation




1. Place the drive belt idler pulley in position to the engine.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the drive belt idler pulley bolt and tighten to 50 Nm (37 lb ft).

scientia non olet · About LEMON Manuals