LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> STS AWD V6-3.6L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> Repair Instructions >> 140. Drive Belt Tensioner Installation - Right Side

140. Drive Belt Tensioner Installation - Right Side




Drive Belt Tensioner Installation - Right Side




1. Place the right drive belt tensioner in position to the engine front cover.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the right drive belt tensioner bolt. Tighten the right drive belt tensioner bolt to 23 Nm (17 lb ft).

scientia non olet · About LEMON Manuals