Interior Trim and Paneling

Front Floor Console Cup Holder Replacement

Removal Procedure

1. Remove the center console. Refer to Front Floor Console Replacement (Service and Repair).




2. Remove the front HVAC duct (1).
3. Remove the screws (2) securing the side impact brace.




4. Remove the screws (1) securing the center HVAC duct.




5. Remove the screws (1) securing the cupholder to the console.




6. Remove the screws (1) securing the cupholder to the top of the console.

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the screws (1) securing the cupholder to the top of the console and tighten to 2 Nm (18 lb in).




2. Install the screws (1) securing the cupholder to the console and tighten to 2 Nm (18 lb in).




3. Install the screws (1) securing the center HVAC duct and tighten to 2 Nm (18 lb in).




4. Install the front HVAC duct (1).
5. Install the screws (2) securing the side impact brace and tighten to 2 Nm (18 lb in).
6. Install the center console. Refer to Front Floor Console Replacement (Service and Repair).