Radio Front Floor Console Speaker Replacement

Radio Front Floor Console Speaker Replacement

Removal Procedure

1. Remove the center floor console end panel. Refer to Center Console End Panel Replacement (Service and Repair).




2. Remove the screws securing the speaker to the console end panel.
3. Disconnect the electrical connector.

Installation Procedure




1. Connect the electrical connector.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the screws securing the speaker to the end panel and tighten to 2 Nm (18 lb in).
3. Install the center floor console end panel. Refer to Center Console End Panel Replacement (Service and Repair).