Input and Output Speed Sensor Assembly Installation
Input and Output Speed Sensor Assembly Installation
| Callout | Component Name |
|---|---|
| 1 | A/Trans Input and Output Speed Sensor Wiring Harness Clip (Qty: 2) Tip: Inspect the 2 wiring harness clips for damage. Replace if damaged. |
| 2 | A/Trans Input and Output Speed Sensor Assembly |
| 3 | Bolt M6 x 20 (Qty: 2)
CAUTION:
Refer to Fastener Caution
.
Tighten: 12 N.m (106 lb in) |