LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> Escalade EXT >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 6L80/6L90 - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Diagnostic Information And Procedures >> Vibration

Diagnostic Information And Procedures: Vibration

Checks Causes
Lug bolts for the Torque Converter (1) Inspect for loose torque converter (1) lug bolts.
Input Sun Gear Thrust Washer (55) Inspect for wear or damage.
Turbine Shaft Thrust Bearing Assembly (57) Inspect for wear or damage.
2-6 and 3-5-R Clutch Hub Thrust Bearing Assembly (65) Inspect the bearing for wear or damage.
Output Carrier Assembly (68)
  • Inspect the carrier assembly for damaged pinion gears, thrush washers, pins, and rollers.
  • Inspect for a worn or damaged center support roller bearing assembly (485).
  • Inspect for damaged thrust bearings (486, 488).
  • Inspect the carrier assembly for damaged output carrier rear sun gear thrust bearing (captured).
Output Carrier Thrust Bearing Assembly (69) Inspect the bearing for wear or damage.
Output Shaft Thrust Bearing Assembly (71) Inspect the bearing for wear or damage.
1-2-3-4 Clutch Hub Thrust Bearing Assembly (63) Inspect the bearing for wear or damage.
Turbine Shaft Thrust Bearing Assembly (57) Inspect the bearing for wear or damage.