Rear Wheelhouse Panel Liner Replacement (RPO X88 Chevrolet, RPO O88 GMC)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 GMC Yukon XL, 2010 GMC Yukon, 2010 Chevrolet Tahoe, 2010 Chevrolet Suburban, and 2010 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the appropriate tire and wheel assembly. Refer to Tire and Wheel Removal and Installation . |
|
| 1 | Rear Wheelhouse Liner Retainer (Qty: 3) |
| 2 | Rear Wheelhouse Liner Screw (Qty: 7)
CAUTION:
Refer to Fastener Caution
.
Tighten: 2 N.m (18 lb in) |
| 3 | Rear Wheelhouse Liner Tip: Before attempting to remove the wheelhouse liner remove any plastic retainers and/or bolts passing through or attached to the wheelhouse liner. |