LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 240 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Knee Bolster Replacement (Except Cadillac)

Knee Bolster Replacement (Except Cadillac)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 GMC Yukon XL, 2010 GMC Yukon, 2010 Chevrolet Tahoe, 2010 Chevrolet Suburban, and 2010 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Knee Bolster Assembly & Components
GM1682666Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedures: 
Remove the left instrument panel outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement (Except Cadillac) .
1 Knee Bolster Assembly Screw (Qty: 2)
CAUTION: Refer to Fastener Caution .

Tighten:  2 N.m (18 lb in)
2 Knee Bolster Assembly

Procedure

  1. Disconnect the electrical connections, if applicable.
  2. If replacing the knee bolster assembly, transfer all necessary components.
3 Retainer Clip (Qty: 4)
scientia non olet · About LEMON Manuals