Front Seat Cushion Inner Trim Panel Replacement (with HP2)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 GMC Yukon XL, 2010 GMC Yukon, 2010 Chevrolet Tahoe, 2010 Chevrolet Suburban, and 2010 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Front Seat Cushion Inner Trim Panel (With HP2)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the front seat back cushion lower finish panel by pulling the panel rearward to disengage the retainers. Remove the front seat belt buckle. Refer to Driver or Passenger Seat Belt Buckle Replacement (with HP2) .
1	Front Seat Cushion Inner Trim Panel Screw (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten: 2 N.m (18 lb in)
2	Front Seat Cushion Inner Trim Panel

Callout

Component Name

Preliminary Procedure

Remove the front seat back cushion lower finish panel by pulling the panel rearward to disengage the retainers.
Remove the front seat belt buckle. Refer to Driver or Passenger Seat Belt Buckle Replacement (with HP2) .

Front Seat Cushion Inner Trim Panel Screw (Qty: 2)

CAUTION: Refer to Fastener Caution .

Tighten: 2 N.m (18 lb in)

Front Seat Cushion Inner Trim Panel