LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> Escalade EXT >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Exhaust Muffler Insulator, Hanger, and Bracket Replacement (With 1500 and LC9, LMG, LY5 or L76) >> Removal Procedure

Removal Procedure

WARNING: Refer to Protective Goggles and Glove Warning .
WARNING: Refer to Exhaust Service Warning .
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
    NOTE:
    • Service the exhaust system insulators individually in order to retain the support for the exhaust system.
    • Do not use oil base lubricants.
    2. Fig 1: View Of Exhaust System Insulators
    GM1709436Courtesy of GENERAL MOTORS CORP.
    NOTE: Do not use oil base lubricants.
  2. Apply a soapy solution to the following in order to ease the removal of the hanger (1):
    • The frame support bracket rod (2)
    • The exhaust pipe hanger rod (3)
  3. Pry the exhaust pipe hanger (1) free from the following:
    • The frame support bracket rod (2)
    • The exhaust pipe hanger rod (3)
scientia non olet · About LEMON Manuals