LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> Escalade EXT >> Repair and Diagnosis >> Brakes >> Anti-Lock Brakes >> Antilock Brake System - Non-Hybrid Greater Than/Equal To 3900 Kg (8600 Lb) GVW >> Diagnostic Information and Procedures >> DTC C0201 >> Circuit/System Testing

Circuit/System Testing

  1. Ignition OFF, disconnect the harness connector at the EBCM.
  2. Test for less than 1 ohm between the ground terminals 13 and 38 and ground.
    • If greater than the specified range, test the ground circuits for an open/high resistance.
  3. Verify that a test lamp illuminates between the B+ terminals 25 and 1 and ground.
    • If the test lamp does not illuminate, test the B+ circuits for a short to ground or an open/high resistance.
  4. If all circuits test normal, replace the EBCM.
scientia non olet · About LEMON Manuals