Torque Converter Removal and Holding Fixture Installation

Fig 1: Torque Converter And Holding Fixture Component View

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Torque Converter Assembly
2	Transmission Case Assembly Tip: Rotate the transmission so that the converter housing is up and secure with locking pin. Allow any remaining transmission fluid to drain from the case extension. Special Tools DT 47605: Holding Fixture Adapter J 3289-20: Holding Fixture Base Assembly J 8763-B: Holding Fixture For equivalent regional tools, refer to Special Tools .

Callout

Component Name

Torque Converter Assembly

Transmission Case Assembly
Tip:

Rotate the transmission so that the converter housing is up and secure with locking pin.
Allow any remaining transmission fluid to drain from the case extension.

Special Tools

For equivalent regional tools, refer to Special Tools .