LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Hybrid Engine Controls - DTC P181C To DTC P2797) >> DTC P1A8A >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different variant/trim than selected.
  1. Start the engine.
  2. Using the scan tool, observe the 42V Circuit Voltage parameter on the APM data list.
    • If the 42V Circuit Voltage parameter is greater than 48 volts, replace the APM.
    • If the 42V Circuit Voltage parameter is less than 48 volts, replace the PSCM.
scientia non olet · About LEMON Manuals