LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Hybrid Engine Controls - DTC P181C To DTC P2797) >> DTC P1A89 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different variant/trim than selected.
  1. Start the engine.
  2. Using the scan tool, observe the 42V Circuit Voltage parameter on the APM data list.
    • If the voltage is less than 40 volts, proceed to Circuit/System Testing.
  3. Rotate the steering wheel back and forth while stationary.
    • If the voltage is less than 40 volts, the EPS is drawing excessive current. Replace the power steering motor.
scientia non olet · About LEMON Manuals