Sun Gear Shaft, Sun Gear Carrier, 1-3 Clutch Housing, and Main Shaft Removal
WARNING: This page is about a different variant/trim than selected.
| Callout | Component Name |
|---|---|
| 1 | Sun Gear Shaft Assembly - 1st Position |
| 2 | Internal Gear Thrust Bearing Assembly - 2nd Position |
| 3 | Main Shaft Assembly |
| 4 | Sun Gear Carrier Assembly - 2nd Position |
| 5 | Sun Gear Assembly - 2nd Position |
| 6 | 1-3 Clutch Housing Assembly |
| 7 | Hybrid Direct, 2-3-4 Clutch Housing Thrust Bearing Assembly |
| 8 | Sun Gear Shaft Retaining Ring
WARNING:
Use care when removing or installing the retaining ring, or bodily injury may occur.
|
| 9 | Sun Gear Shaft Assembly - 1st Position |
| 10 | Internal Gear - 2nd Position |