Manual Shift Shaft Seal Replacement

WARNING: This page is about a different variant/trim than selected.

Fig 1: Manual Shift Shaft Seal Replacement

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Manual Shift Shaft Seal CAUTION: Do not damage the case bore during removal of the manual shift shaft seal. CAUTION: When installing the seal, ensure the seal lip is firmly seated against the case bore surface. Do not allow the seal lip to be crushed, or a leak may result. Tip: Always install a NEW seal into the case. Special Tools DT 47770 Seal Installer J 45201 Cooler Line Seal Remover

Callout

Component Name

Manual Shift Shaft Seal

CAUTION: Do not damage the case bore during removal of the manual shift shaft seal.

CAUTION: When installing the seal, ensure the seal lip is firmly seated against the case bore surface. Do not allow the seal lip to be crushed, or a leak may result.

Tip: Always install a NEW seal into the case.

Special Tools

DT 47770 Seal Installer
J 45201 Cooler Line Seal Remover