LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Automatic Transmission - 2ML70 - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - Off Vehicle >> Hybrid Direct, 2-3-4 Clutch Housing Overhaul >> 2-3-4 Clutch Assemble

2-3-4 Clutch Assemble

WARNING: This page is about a different variant/trim than selected.
Fig 1: 2-3-4 Clutch
GM1927131Courtesy of GENERAL MOTORS CORP.
2-3-4 Clutch Assemble

Callout Component Name
1 Hybrid Direct, 2-3-4 Clutch Piston Inner Seal
2 Hybrid Direct, 2-3-4 Clutch Piston
3 Hybrid Direct, 2-3-4 Clutch Piston Outer Seal
4 Hybrid Direct, 2-3-4 Clutch Piston Return Spring
5 Hybrid Direct, 2-3-4 Clutch Piston Dam
6 Hybrid Direct, 2-3-4 Clutch Piston Ring
Tip: 
  • Use a NEW retaining ring. Do not reuse the retaining ring, it is not reusable.
  • Use DT 47867  to install the 2-3-4 ring.

Special Tool: 
DT 47867  Adjustable Clutch Spring Compressor
scientia non olet · About LEMON Manuals