Auxiliary Fluid Pump Installation
WARNING: This page is about a different variant/trim than selected.
| Callout | Component Name |
|---|---|
| 1 | A/Trans Auxiliary Fluid Pump Gasket
CAUTION:
The auxiliary fluid pump gasket is not re-usable. Use a NEW gasket when replacing or damage may occur.
|
| 2 | A/Trans Auxiliary Fluid Pump Assembly
CAUTION:
Do not damage the case sealing surface when removing or installing the pump and motor assembly.
|
| 3 | A/Trans Auxiliary Fluid Pump Bolt M6 x 1.0 x 65 (Qty: 4)
CAUTION:
Refer to Fastener Caution
.
Tighten: Tighten to 9-13 N.m (80-115 lb in). |