Noise in First, Second, Third, Fourth, or Reverse Gear
WARNING: This page is about a different variant/trim than selected.
| Checks | Causes |
|---|---|
| Input Shaft Assembly (64) | Inspect thrust washers, and ring gear for wear damage. |
| Sun Gear Carrier Assembly 1st - 2nd - 3rd Position (67, 77, 434) | Inspect thrust washers, pinion gears, and pins for wear damage. |
| 1-3 Clutch Housing Assembly (80) and 2-3-4 Clutch Assembly (471) | Inspect for worn or damaged clutch bearing. |