No First and Reverse Gears
WARNING: This page is about a different variant/trim than selected.
| Checks |
Causes |
| Hybrid Low 1-2 Clutch Assembly |
- Inspect for damaged or worn low and 1-2 clutch plates.
- Inspect for damaged 1-2 clutch backing plate. Inspect for worn splines on backing plate.
- Inspect for damaged 1-2 clutch backing plate retaining ring.
- Inspect for damaged 1-2 clutch piston assembly, spring, spring retaining ring, and center support assembly.
|
| Output Carrier Assembly |
Inspect for damaged or stripped splines on the output carrier assembly. |