LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Automatic Transmission - 2ML70 - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Diagnostic Information and Procedures >> No Drive or Reverse Gear

No Drive or Reverse Gear

WARNING: This page is about a different variant/trim than selected.
Checks Causes
Hybrid Low 1-2 Clutch Assembly
  • Inspect for damaged 1-2 clutch housing assembly.
  • Inspect for damaged or distorted shaft.
4th Clutch Hub Assembly Inspect for damaged or distorted shaft on hub assembly.
Hybrid Direct 2-3-4 and 1-3 Clutch Hub Assembly
  • Inspect for damaged or distorted shaft on hub assembly.
  • Inspect the output carrier inner sun gear shaft bushings for damage or wear.