LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Hybrid Engine Electrical System (Hp2)) >> Diagnostic Information and Procedures >> DTC C0895 (ESC) >> Circuit/System Verification (ESC)

Circuit/System Verification (ESC)

WARNING: This page is about a different variant/trim than selected.
  1. Engine running, accessories OFF, measure and record the battery voltage at the 12V battery terminals. The voltage should be between 12.6 and 15.0 volts.
  2. Observe the scan tool ESC module Battery Voltage Signal parameter. The reading should be between 12.6 and 15.0 volts.
scientia non olet · About LEMON Manuals