LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Hybrid Engine Electrical System (Hp2)) >> Diagnostic Information and Procedures >> DTC C0800 >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different variant/trim than selected.

The power steering control module (PSCM) monitors the 12V system voltage to make sure that the voltage stays within the proper range. Damage to components, and incorrect data input can occur when the voltage is out of range. The PSCM monitors the system voltage. If the PSCM detects a 12V system voltage outside an expected range, DTC C0800 will set.

scientia non olet · About LEMON Manuals