LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Engine Mechanical - Hybrid (Hp2) 6.0L (LFA)) >> Repair Instructions - Off Vehicle >> Valve Lifter Removal

Valve Lifter Removal

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Lifter Guides & Lifters
    GM1402039Courtesy of GENERAL MOTORS CORP.
  1. Remove the bolts (211).
  2. Remove the guides (210) with lifters.

    Note the installed position of the guides. The notched area of the guide is to align with the locating tab of the block.

    3. Fig 2: Exploded View Of Lifter Guides & Lifters
    GM1402040Courtesy of GENERAL MOTORS CORP.
  3. Remove the valve lifters (209, 219) from the guide (210).
    4. Fig 3: Inserting Valve Lifters Into Lifter Guides
    GM1402044Courtesy of GENERAL MOTORS CORP.
  4. Organize or mark the components so they can be installed in the same location from which they were removed. The active fuel management lifters (4) are installed into the guide by aligning the notched area of the guide (1) with the raised surface on the side of the lifter (2). Refer to Separating Parts .
scientia non olet · About LEMON Manuals