LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Engine Mechanical - Hybrid (Hp2) 6.0L (LFA)) >> Repair Instructions - Off Vehicle >> Oil Pump, Screen and Crankshaft Oil Deflector Removal

Oil Pump, Screen and Crankshaft Oil Deflector Removal

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Oil Pump Screen, Bolt, Nuts, & O-Ring Seal
    GM1277115Courtesy of GENERAL MOTORS CORP.
  1. Remove the oil pump screen bolt (405) and nuts (404).
  2. Remove the oil pump screen (407) with O-ring seal (406).
  3. Remove the O-ring seal from the pump screen.
  4. Discard the O-ring seal.
    5. Fig 2: View Of Crankshaft Oil Deflector
    GM260099Courtesy of GENERAL MOTORS CORP.
  5. Remove the remaining crankshaft oil deflector nuts.
  6. Remove the crankshaft oil deflector.
    7. Fig 3: Identifying Oil Pump & Bolts
    GM1967314Courtesy of GENERAL MOTORS CORP.
  7. Remove the oil pump bolts (411).
    8. IMPORTANT: Do not allow dirt or debris to enter the oil pump assembly. Cap ends, as necessary.
  8. Remove the oil pump (413).
scientia non olet · About LEMON Manuals