LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Hybrid Engine Controls - DTC P0AFF To DTC P16F9) >> DTC P16F5 >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different variant/trim than selected.
  1. Ignition OFF, disconnect the 12V battery. Refer to Battery Negative Cable Disconnection and Connection .
  2. Wait 2 minutes.
  3. Reconnect the 12V battery. Refer to Battery Negative Cable Disconnection and Connection .
  4. Ignition ON, retest for DTC P16F5.
    • If the DTC resets, program the PIM with the latest software version and recheck for DTCs. If the DTC resets after programming or if the PIM already contains the latest software version, replace the PIM.
scientia non olet · About LEMON Manuals