LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Hybrid Engine Controls - DTC P0AFF To DTC P16F9) >> DTC P0C19 >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different variant/trim than selected.
  1. Inspect for DTCs P0A3F, P0A40, P0A78, P0BFD, P0C01, P0C05, P0C0B, P0C17, P0C4E, P0C52, P0C53, P0C5C, P0C5D, P1AF8, P1B03, or P1B0F.
  2. Inspect for the following conditions:
      IMPORTANT: If a seized condition is observed, internal transmission damage may have occurred.
    • Seized or binding engine
    • Seized or binding accessory drive belt
    • If a seized or binding condition is observed, repair as required.
    • If no engine condition is observed, program the PIM with the latest software version and recheck for DTCs. If the DTC resets after programming or if the PIM already contains the latest software version, replace the drive motor generator assembly.
scientia non olet · About LEMON Manuals