Typical Scan Tool Data
WARNING: This page is about a different variant/trim than selected.
Ignition Scan Tool Data
| Circuit |
Short to Ground |
Open |
Short to Voltage |
| Operating Conditions:
Ignition ON, engine OFF, and run/crank and powertrain relay are commanded ON |
| Ignition 1 Voltage, Run/Crank |
0 Volts |
0 Volts |
12 Volts |
| EC Ignition (Powertrain) Relay Feedback Signal |
0 Volts |
0 Volts |
12 Volts |