Conditions for Setting the DTC

Any one or more of the following conditions:

• The IMS signal circuit A, B, or P are Low in Park for greater than 8 seconds.
• The IMS signal circuit A is Low in D for 8 seconds.
• The IMS signal circuit C is High in D for 8 seconds.
• The TCM detects an invalid range from the IMS for 3.25 seconds.
• The IMS signal circuit C is high in D for greater than 8 seconds.
• Park/Neutral Switch equals P/N and the IMS state is not Park or Neutral, or the Park/Neutral switch is not Park or Neutral and the IMS state equals Park or Neutral for 4 seconds.
• Or the automatic transmission manual shift shaft position switch assembly indicates a transitional state for 8 seconds.