LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Automatic Transmission - 2ML70 - DTC P0218 To DTC P0967) >> DTC P0965-P0967 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different variant/trim than selected.

Perform the following procedure to place the control solenoid (w/body and TCM) valve assembly under the optimal conditions to test solenoid electrical DTCs.

  1. Ensure the transmission fluid temperature is between 50-80°C (122-176°F).
  2. Operate the vehicle in 2nd gear long enough to ensure at least a 3°C (5°F) rise in TCM temperature, then operate the vehicle in 3rd gear for 5 seconds.
    • If the DTC resets, go to Circuit/System Testing.
scientia non olet · About LEMON Manuals